Conveyor Belt Splicing Press provided by Arphu is a tool that’s used to splice and repair conveyor belt, it’s also called conveyor belt vulcanizer, hot vulcanizing press, etc.
From function aspect, the conveyor belt splicing press can provide curing temperature, stable working pressure and vulcanizing time is controlled by automatic control cabinet. Its service belt is EP, rubber, ST conveyor belt, etc. For emergency hot splicing conveyor belt, we can use built-in water cooling system, it only costs about 8 to 15 minutes from vulcanizing temperature to 60 centigrade. The conveyor belt splicing press can save time and decrease labor force, its characteristics are light in weight, rapid repairing and hot splicing, easy to be moved and operated.
Conveyor Belt Splicing Press is divided by the belt width, generally it’s from 650 mm to 2800 mm, if the conveyor belt width is beyond than 2800 mm, the Conveyor Belt Splicing Press has to adopt steel cross beams to increase the working pressure.
Conveyor belt splicing press structure
The splicing press is composed of the following parts.
1. Cross beam;
3. Iron plates for cushion;
7.High-pressure soft pipe;
9. Heat-insulation plate;
10. Upper heating plates;
11. Secondary cable;
12. Electric control box;
13. Primary cable;
14. Down heating plates;
15. Hydraulic plates (please find Fig1 in detail)
2. Vulcanization temperature: 145°C;
3. Difference in surface temperature of vulcanized plate: ± 5°C;
4. Heating up time ( at normal temperature to 145°C )<30 minutes;
5. Voltage: 220V/ 380V/415V/440V/480V/550V/660V, 50/60HZ, 3 Phases;
6. Temperature adjustment range: 0 to 199°C;
7. Timer adjustment range: 0 to 99 minutes.
Features of Conveyor Belt Splicing Press:
1. Heating Plate: lightweight, portable, pressure and temperature uniformity;
2. Water Plate: high pressure can reach Max. 2.0 MPa (20 bars or 290 psi);
3. Cross Beam: lightweight & high tensile aluminum alloy.
The configuration options are described in the following sections.
Heating plates of the conveyor belt splicing press are available for rhombic, rectangular and modular type (two or more sets of heating plates together).
Modular conveyor belt vulcanizer can be applied to Belt width 3200 mm maximum.
Special design and production service is offered as per requirements of clients.
1. Belt width, belt material( such as EP, NN, or ST) and splicing length (joint lenth);
2. Voltage, such as 380V 50HZ 3 phases;
3. Electrical pump or manual pump;
4. Standard (automatic) control cabinet or PLC touch screen control cabinet.